| Conductivity Measurement Range |
0.01 ms/cm to 20.00 ms/cm and 200.0 ms/cm and 2000 ms/cm and 20.00 mS/cm2 and 200 mS/cm2 |
| Accuracy |
±0.5% F.S. |
| Resolution |
0.001 and 0.01 and 0.1 and 1 |
| Calibration Points |
1 to 5 Points |
| Calibration Solution |
10 µS/cm and B4 µS/cm and 1413 µS/cm and 12.88 mS/cm and 111.8 mS/cm or User-Defined |
| TDS Measurement Range |
0 ppm to 10.00 ppm and 100.0 ppm and 1000 ppm 10.00 ppt and 100 ppt (Max. 200 ppt) |
| Accuracy |
1% FS |
| Resolution |
0.01, 0.1, 1 |
| TDS Factor |
0.01 to 1.00 (Default 0.5) |
| Salinity Measurement Range |
0.00 ppt to 80.00 ppt and 0.00 psu to 42.00 psu |
| Accuracy |
1% FS |
| Resolution |
0.01, 0.1, 1 |
| Measurement Modes |
Practical Salinity (Psu) or Natural Seawater (Ppt) |
| Resistivity Measurement Range |
0.00 MQ to 20 ΜΩ |
| Accuracy |
1% FS |
| Resolution |
0.01, 0.1, 1 |
| Temperature Measurement Range |
32 °F to 221 °F (0 °C to 105 °C) |
| Accuracy |
0.9 °F (0.5 °C) |
| Resolution |
0.1 °F (0.1 °C) |
| Calibration Points |
1 Point |
| General Temperature Compensation |
32 °F to 212 °F (0 °C to 100 °C), Manual or Automatic |
| Cell Constant |
K-0.1, 1, 10 or User-defined |
| Temperature Coefficient |
Linear and Pure Water Compensation |
| Reference Temperature |
77 °F (25 °C), 68 °F to 77 °F (20 °C or 25 °C) |
| Hold Function |
Manual or Automatic Endpoint Detection |
| Stability Criteria |
Low or High |
| Calibration Due Alaram |
1 to 31 days |
| Power Off |
Manual or Automatic (10 min and 20 min or 30 min After Last Key Pressed) |
| Memory |
Stores Up to 50 Data Sets |
| Output |
USB Communication Interface |
| Connector |
6-pin Mini Plug |
| Power Requirement |
3 V x 1.5 V AA Batteries or DC 5 V Power Adapter |
| Dimension |
6.69 in × 3.34 in × 1.18 in (170 mm x 85 mm × 30 mm) |
| Weight |
0.62 lb. (300 g) |
Reviews
There are no reviews yet.