Overview
Hospitality Enviro Tech Filter tube gas hygrometer is one of the most advanced handheld VOC (Volatile Organic Compound) monitors available for f (parts per billion) detection. VOCs include a variety of chemicals such as for ppb benzene, alcohols, fuels, paint thinner industrial solvents and many others, which can have short and long-term adverse health effects. Measuring these compounds is essential for worker protection in industries like oil & gas, fire & hazmat, pharmaceuticals, paints & adhesives, and many others. In addition, VOC monitoring is useful chemical process control detecting leaks and other releases to the environment, and in measuring indoor air quality. The NEO offers several models from the most sensitive 1 ppb to a high range up to 15,000 ppm for different applications, and a filter tube version (NEO BENZ) for benzene specific or butadiene specific measurements. In addition to the standard continuous read-out, a Leak Detection and Repair (LDAR) mode is included. Novel designs of the Photo ionization Detector (PID) and Ultraviolet (UV) lamp provide outstanding sensitivity, stability and reproducibility. Includes real time data monitoring using Power Suite software via cable to a PC or via Bluetooth to an Android phone or tablet.
Features
- Smaller and lighter weight than comparable PIDs
- stable ppb-level PID on the market
- Outstanding linearity over full measurement range
- Easy charging on laptop or other USB port
- USB Micro Charger; combination USB-m charging and communications cable
- Powerful battery (run time 24 hours)
- Bluetooth Low Energy (BLE) connectivity standard
- Search Mode for LDAR Sampling
- Filter tube version for benzene or butadiene selective measurements
- Large blacklight graphic display
- Lamp glow indicator
- Rugged, stainless-steel housing with rubber outer boot
Technical Specifications
| Sensor | 24.9 oz (708 g) (w/boot) Photo ionization sensor with standard 10.6 eV lamp (9.8 eV lamp in MP 186) |
| Response Time | 3 sec (too) VOC Mode 45. set @ 68°F (20°C) Benzene Tube Mode (MP186) |
| Accuracy | 43% (at calibration point) |
| Battery or Run Time | Rechargeable Lithium Ion battery with 24 hours typical operation |
| Keypad | 4 operation keys |
| Sampling Time | Built in pump with 3 settings from 300 to 430 cc or min Sample from up to 100 ft (30 m) |
| Display | 128 x 128 graphic LCD, 1.77 in x 1.73 in (45 mm x 44 mm), with LED backlight for enhanced display readability |
| Direct Readout | Real time reading of gas concentration (ppb, ppm, mg or m³, µg or m³), PID measurement gas and correction factor, lamp on or off, Man Down alarm on or off, battery status, pump status, datalogging on or off, wireless on or off, temperature and time |
| Operating Mode | • Continuous readout with real time data download to PC • Individual sampling mode for Leak Detection & Repair |
| Alarms | i) Audible (95 dB @ 30 cm), visual (flashing bright red LEDS), and on-screen indication of alarm conditions ii) High, Low, TWA and STEL alarms iii) Over range alarm, battery low alarm iv) Man-Down alarm with pre-alarm and mote wireless notification |
| Datalogging capacity | i) Standard 12 months at one-minute intervals ii) Storage interval adjustable from 1 to 3,600 seconds iii) 9999 LDAR sample points storage |
| Calibration | Two or Three point calibration |
| Low Flow Alarm | Auto Pump shut off at low flow condition |
| Charging Communication | Charging, data download, instrument configuration and firmware upgrades on PO or laptop via Micro USB. Configuration also via BLE using mobile App on Android phone or tablet |
| BLE Range | 10 m (33 ft) line of sight |
| Correction Factors | Integrated correction factor list of > 700 compounds |
| IP rating | IP 66 or 67 |
| Temperature | -4 °F to 122 °F (-20 ℃ to 50 ℃) |
| Humidity | 0 % to 95 % Relative humidity (non condensing) |
| Size | 9.1 in x 2.9 in x 2.2 in (230 mm x 74 mm x 55 mm) |
| Weight | 1.56 lb or 0.000708 ton (0.708 kg) |
Reviews
There are no reviews yet.