Overview
Hospitaity Enviro Tech Multiparameter PH Meter contains 8 measurement modes, the meter is suitable for measuring the pH, ORP, ion, conductivity, TDS, salinity, resistivity and dissolved oxygen.
Features
- Equipped with a backlit LCD display.
- 1 to 5 points push button calibration with auto buffer recognition
- Selectable pH buffer group or using the custom calibration solutions
- Automatic electrode diagnosis with pH slope and offset display
- 1 point offset calibration allows adjusting the displayed value to a known standard
- Relative and absolute millivolt modes provide the reliable ORP measurements
- 2 to 5 points calibration, including the 8 concentration points can be selected
- Automatically recognises the ion selective electrode
- Direct ion concentration readout simplifies the measurement process
- Selectable concentration units, including the ppm, mg/L and mol/L
- 1 to 5 points calibration, automatically recognises conductivity standard solutions
- Selectable cell constant, reference temperature, TDS factor, linear or pure water compensations, seawater and practical salinity measurement modes
- 1 or 2 points calibration using the air saturated water or zero oxygen solution
- Selectable the salinity and barometric pressure compensation coefficients
- Automatic Temperature Compensation ensures accurate readings over entire range
- Calibration Due Alarm prompts user to calibrate the meter regularly
- Stability indicator shows when a measurement is recognised as stable
- Auto read feature senses and locks the measurement endpoint
- Battery indicator shows the remaining battery capacity
- Auto power Off effectively conserves battery life
- Calibration report provides the details for checking the electrode performance
- Setup menu allows setting the 15 parameters
- Reset feature automatically resumes all settings back to factory default options
- Expanded memory stores and recalls up to 500 data sets
- Stored readings can be transferred into computer by USB communication interface
- Multi-mode power scheme ensures that use the meter smoothly
Technical Specifications
| PH Range | -2.000 pH to 20.000 pH |
| MV Range | ± 1999.9 mV |
| Ion Range | 0.001 to 19999 (Depending On The Range Of ISE) |
| Conductivity | 0.01 to 20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm |
| TDS | 0 to 10.00, 100.0, 1000 ppm, 10.00, 100.0 ppt (Max. 200 ppt) |
| Salinity | 0.00 to 80.00 ppt, 0.00 psu to 42.00 psu |
| Resistivity | 0.00 MΩ to 20.00 MΩ |
| Battery | 3 V x 1.5 V Button Cell Batteries |
| Probe | Detachable Platinum Electrodes |
Reviews
There are no reviews yet.