Hospitaity Enviro Tech Digital Electrical Conductivity

This Digital electrical conductivity has protection level IP 65, three control contacts,5 A 250 V AC,5 A 30 V DC and stability ± 0.2 % F.S per 24h.

SKU: HETHCM-255 Category:

Features

  • Colour LCD Display
  • Intelligent menu operation
  • Data Recording & Curve Display
  • Manual or automatic temperature compensation
  • Three sets of relay control switches
  • High & low alarm and hysteresis control
  • 4 mA to 20 mA & RS 485 Multiple output modes.
  • Display measurements, temperature, state, etc. on the same interface
  • Password protection function to prevent misoperation by non staff

 

Technical Specifications

Protection Level IP 65
Two Current Outputs 0 per 4 mA to 20mA (load resistance<750 Ω); 20 mA to 4 mA ( load resistance < 750 Ω)
Signal Output RS 485 MODBUS RTU
Three Sets Of Relay Control Contacts 5 A 250 V AC,5 A 30 V DC
Stability ± 0.2 % F.S per 24h
Power Supply 85 to 265 V AC ± 10 %, 50 ± 1Hz, power ≤ 3 W; 9 to 36 V DC, power consumption ≤ 3 W
Measuring Range Conductivity:0 mS per cm to 2000 mS per cm;
TDS: 0 g per L to 1000 g per L
Concentration: Please see the built-in chemical concentration table
Temperature: – 14 °F to 302 °F (- 10 ºC to 150.0 ºC)
Resolution Conductivity:0.01 μS per cm ;0.01 mS per cm;
TDS:0.01 mg per L; 0.01 g per L
Concentration: 0.01%;
Temperature: 32.18 °F (0.1 ºC)
Basic Error ± 0.5 % F.S;
Temperature:± 32.54°F (± 0.3 ºC);
Concentration:± 0.2 %
Dimensions 5.67 in x 5.67 in x 4.65 in (144 mm  x144 mm  x 118 mm)
Installation Panel, wall mounting and pipeline ;
Panel opening size:5.43 in x 5.43 in (138 mm x138 mm)
Working Environment Operating temperature: 14 °F to 140 °F (-10 ºC to 60 ºC);
Relative humidity:  ≤ 90 %;
Weight 1.76 lb (0.8kg)

Reviews

There are no reviews yet.

Be the first to review “Hospitaity Enviro Tech Digital Electrical Conductivity”

Your email address will not be published. Required fields are marked *

Scroll to Top