Overview
Hospitality Enviro Tech desktop USB digital storage oscilloscopes are super-economical types of digital storage oscilloscopes. The 2-channel oscilloscopes have a bandwidth of 200 MHz. They have ultra-thin bodies and are designed with 7 in (17.78 cm) high-resolution LCDs. They support SCPI and LabVIEW. They are used for electronic circuit debugging, circuit testing, design and manufacture, education and training, and automobile maintenance and testing.
Features
- single channel 500 MS/s
- double channel 1GS/s 5 ns/div to 1000 s/div
- 1 GSa/s Real Time sample rate
- Large 7 in (17.78 cm) TFT color screen
- Record length up to 10 kHz
- 30 automatic measurement values
- With 16 waveform parameter measurements
- Plug and play USB, can relate to computer communication
- system software upgrade with U disk
- Support the stored waveform and the current waveform
- Ultra-thin body, portable
Technical Specifications
| Sample Rate (real Time) |
Single channel；500 MS/s double channel：1 GS/s
500 MS/s 1 GS/s |
| Input Coupling | DC, AC, Ground |
| Input Impedance | 1 MΩ±2%, in parallel with 20 pF±5 pF |
| Input Coupling | 1X，10X，100X，1000X |
| Max. Input Voltage | 400 V (DC + AC, PK – PK) |
| Channel–Channel Isolation | 50 Hz: 100: 1 10 MHz: 40: 1 |
| Time Delay Between Channel(typical) | 150 ps |
| Bandwidth Limit | 20 MHz, full bandwidth |
| Sampling Rate Range | 0.5 S/s to 200 MS/s
0.5 S/s to 500 MS/s 0.5 S/s to 1 GS/s |
| Interpolation | (Sin x)/x |
| Max Record Length | 10 K |
| Scanning Speed (S/Div) | 5 ns/div-1000 s/div, step by 1-2-5 ≤3 .5 ns
2 ns/div to 1000 s/div, |
| Sampling Rate or Relay Time Accuracy | ±100 ppm |
| Interval (△t) Accuracy (DC-100 MHz) |
Single： ± (1 interval time+100 ppm×reading+0.6 ns); Average>16： ± (1 interval time +100 ppm×reading+0.4 ns) |
| Vertical Resolution (A or D) | 8 bits (2 channels simultaneously) |
| Sensitivity | 5 mV/div to 5 V/div |
| Displacement | ±2 V (5 mV/div to 100 mV/div) ±50 V (200 mV/div to 5 V/div) |
| Analog Bandwidth | 200 MHz
50 MHz 100 MHz |
| Single Bandwidth | Full bandwidth |
| Low Frequency | ≥10 Hz (at input, AC coupling, -3 dB) |
| Rise Time (At Input, Typical) | ≤ 17.5 ns
≤ 7.0 ns ≤ 3.5 ns |
| DC Gain Accuracy | ± 3 % |
| DC Accuracy (Average) | Delta Volts between any two averages of ≥16 waveforms acquired with the same scope setup and ambient conditions (△V): ±(3% reading + 0.05 div) |
| Cursor | △V, △T, △T&△V between cursors, auto cursor |
| Automatic | Period, Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot, Rise Time, Fall Time, +Pulse Width, -Pulse Width, +Duty Cycle, -Duty Cycle, Delay A→B, Delay A→B, Cycle RMS, Cursor RMS, Screen Duty, Phase, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count, Area, and Cycle Area. |
| Waveform Math | ＋, －, *, /, FFT |
| Waveform Storage | 16 waveforms |
| Trigger Level Range | ±5 div from the screen center |
| Trigger Level Accuracy (Typical) | ±0.3 div |
| Trigger Displacement | According to Record length and time base |
| Trigger Holdoff Range | 100 ns to 10 s |
| 50% Level Setting | Input signal frequency ≥ 50 Hz |
Reviews
There are no reviews yet.