Industrial Earth Ground Resistance & Leakage Clamp Meter – Hospitality Enviro Tech

Measure earth-ground resistance and AC leakage currents safely with this rugged, industrial-grade clamp meter featuring data logging, alarms, and a band-pass filter.

SKU: HETBCM-307 Category:

Overview

Hospitality Enviro Tech’s Industrial Earth Ground Resistance & Leakage Clamp Meter is fast and safe. This device measures indoor/outdoor earth-ground resistance and ac leakage currents without disconnecting the earth-ground stake from the grounding system. In addition, this clamp meter features a heavy-duty clamp jaw that stays in alignment and calibration in industrial conditions.

 

Features

  • AC Leakage Current Measurement: Identify leakage without disconnecting the earth ground stake.
  • Rugged Design: Heavy-duty clamp jaw maintains alignment and calibration in industrial environments.
  • Data Logging: Automatically records and stores up to 32,760 measurements at pre-set intervals.
  • Alarm Threshold: User-defined high/low limits for fast measurement evaluation.
  • Band-Pass Filter: Selectable function for optimized measurements.

 

Technical Specification

Specification Details
Maximum Voltage to Earth Ground 1000 V
Frequency Range 40 Hz to 1 kHz
Ingress Protection IEC/EN 60529: IP30 with jaw closed
LCD Digital reading: 9999 counts, Refresh rate: 4/s
Overload Indication OL
Display Reading Specification with Loop Resistance Standard Input: 0.474 Ω, Minimum: 0.417, Maximum: 0.531

Input: 0.5 Ω, Minimum: 0.443, Maximum: 0.558

Input: 10 Ω, Minimum: 9.55, Maximum: 10.45

Input: 100 Ω, Minimum: 96, Maximum: 104

Data Logging Capacity: 32,760 measurements, Interval: 1 sec to 59 min 59 sec
Wireless Radio Frequency range: 2412 to 2462 MHz, Output power: <10 mW, Radio frequency certification: FCC ID: T68-FBLE IC:6627A-FBLE
Safety IEC/EN 61010-1: Pollution Degree 2, IEC/EN 61557-1IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 VIEC/EN 61557-13: Class 2, ≤30 A/mIEC/EN 61557-5, IEC/EN 61557-16: cutoff frequency 20 kHz (-3 dB)
Electromagnetic Compatibility (EMC) IEC/EN 61326-1: Portable Electromagnetic Environment, CISPR 11: Group 1, Class BIEC/EN 61326-2-2, Korea (KCC): Class A equipmentUSA (FCC): 47 CFR 15 subpart B
Conductor Size 1.57 inch (40 mm) approximately
Temperature Operating: 14 to 122°F (-10 to 50°C)

Storage: -4 to 140°F (-20 to 60°C)

Reference: 73°F ±9°F (23°C ±5°C)

Coefficient: 0.15% X (specified accuracy)/°C

Operating Humidity ≤90% RH at 50 to 86°F (10 to 30°C)

≤75% RH at 86 to 104°F (30 to 40°C)

≤45% RH at 104 to 122°F (40 to 50°C) (Non-condensing)

Altitude Operating: 6561 ft (2000 m)

Storage: 39370 ft (12,000 m)

Battery Type: 4 x 1.5 V AA alkaline, Life: More than 15 hrs (with backlight turned off, RF mode off)
Jaw Size 1.37 in (35 mm)
Dimensions 11.1 in x 4.1 in x 1.9 in (283 mm x 105 mm x 48 mm)
Weight 31 oz (880 g)

Reviews

There are no reviews yet.

Be the first to review “Industrial Earth Ground Resistance & Leakage Clamp Meter – Hospitality Enviro Tech”

Your email address will not be published. Required fields are marked *

Scroll to Top